As a modular infrared illuminator, KIJI supports a wide variety of use scenarios – from umbrella lighting interior structures, to punching out hundreds of meters on a SPR. KIJI is compatible and interchangeable with most common CR123 300 series white light bodies and mounts, offering near endless versatility in handheld, helmet, weapon, vehicle, or aircraft mounted applications. This laser illuminator is designed to be used with user-preferred and existing aftermarket mounting hardware or remote switching options – making mounting and adoption as simple as using the parts and switching you already know and train with.

The KIJI comes in two models. Combining the included 10° diffuser on KIJI K1-3˚ and the included 40° diffuser on KIJI K1-10˚, KIJI provides users with flexibility in output, beam pattern, and mounting hardware. This makes KIJI is an extremely high-performing and low-cost laser illuminator capable of meeting any IR illumination scenario or platform requirements.

Overcoming photonic barriers in real world situations has never been as easy or as affordable. Both KIJI K1 models contain four Power Levels (PLs) which may be accessed in a variety of activation configurations based on operational need. The activation configuration of a unit can be altered by entering Programming Mode and selecting the corresponding mode from the table in the User Guide.

Indicator Light:
The Indicator Light is located just above the B.E. Meyers & Co., Inc. product marking. The orientation of the Indicator Light to any given Body the head is attached to will be random. The laser safety warning labels can be found on the reverse side of the device from the Indicator Light.

Aperture Cover, Diffusers & Cowling:
The KIJI K1 laser device(s) come equipped with an Aperture Cover that has a built-in external diffuser. The Aperture Cover and diffuser combination serve to protect the laser aperture window, render all output PLs Class 1 (with the diffuser shipped with the particular model as listed below), and provide the user with the ability to quickly change the beam size of the KIJI K1.

• The KIJI K1-3° is provided with an aperture cover with a 10° diffuser installed, marked with “10”

• The KIJI K1-10° is provided with an aperture cover with a 40° diffuser installed, marked with “40”

Aperture Covers are held in place with a retaining band that can be removed by the user and replaced if necessary. An additional retaining band is included with KIJI K1 kits. Additional Aperture Covers and retaining bands can be purchased separately.

The polymer Cowling around the Head of the device can be independently rotated to orient the flip-open Aperture Cover and to properly expose the Indicator Light. The Cowling serves to retain the aperture cover and is not necessary for function.